We assume any file given to us has one consistent unit throughout. We also assume the file is at the proper scale.

This endpoint returns the cartesian coordinate in world space measure units.

In the future, we will use the units inside the file if they are given and do any conversions if necessary for the calculation. But currently, that is not supported.

Get the center of mass of an object in a CAD file. If the file is larger than 25MB, it will be performed asynchronously.

If the operation is performed asynchronously, the `id` of the operation will be returned. You can use the `id` returned from the request to get status information about the async operation from the `/async/operations/{id}` endpoint.

src_format

Autodesk Filmbox (FBX) format. <https://en.wikipedia.org/wiki/FBX>

The OBJ file format. <https://en.wikipedia.org/wiki/Wavefront_.obj_file> It may or may not have an an attached material (mtl // mtllib) within the file, but we interact with it as if it does not.

The PLY file format. <https://en.wikipedia.org/wiki/PLY_(file_format)>

The STEP file format. <https://en.wikipedia.org/wiki/ISO_10303-21>

The STL file format. <https://en.wikipedia.org/wiki/STL_(file_format)>

output_unit

Centimeters <https://en.wikipedia.org/wiki/Centimeter>

Feet <https://en.wikipedia.org/wiki/Foot_(unit)>

Inches <https://en.wikipedia.org/wiki/Inch>

Meters <https://en.wikipedia.org/wiki/Meter>

Millimeters <https://en.wikipedia.org/wiki/Millimeter>

Yards <https://en.wikipedia.org/wiki/Yard>

Access-Control-Allow-Headers header. This is a comma-separated list of headers.

The Content-Location header for responses that are not the final destination. This is used to indicate where the resource can be found, when it is finished.

The location header for redirects and letting users know if there is a websocket they can listen to for status updates on their operation.

ID for this request. We return it so that users can report this to us and help us debug their problems.

Get CAD file center of mass.

This takes a HTTP multipart body with these fields in any order:

 - The input and output format options (as JSON), name is 'body'.  - The files to convert, in raw binary. Must supply filenames.

This starts a conversion job and returns the `id` of the operation. You can use the `id` returned from the request to get status information about the async operation from the `/async/operations/{id}` endpoint.

Describes the file to convert (src) and what it should be converted into (output).

Convert CAD file from one format to another.

If you wish to specify the conversion options, use the `/file/conversion` endpoint instead.

Convert a CAD file from one format to another. If the file being converted is larger than 25MB, it will be performed asynchronously.

If the conversion is performed synchronously, the contents of the converted file (`output`) will be returned as a base64 encoded string.

If the operation is performed asynchronously, the `id` of the operation will be returned. You can use the `id` returned from the request to get status information about the async operation from the `/async/operations/{id}` endpoint.

The format the file should be converted to.

output_format

Binary glTF 2.0.

This is a single binary with .glb extension.

This is better if you want a compressed format as opposed to the human readable glTF that lacks compression.

glTF 2.0. Embedded glTF 2.0 (pretty printed).

Single JSON file with .gltf extension binary data encoded as base64 data URIs.

The JSON contents are pretty printed.

It is human readable, single file, and you can view the diff easily in a git commit.

Convert CAD file with defaults.

We assume any file given to us has one consistent unit throughout. We also assume the file is at the proper scale.

This endpoint assumes if you are giving a material mass in a specific mass units, we return a density in mass unit per cubic measure unit.

In the future, we will use the units inside the file if they are given and do any conversions if necessary for the calculation. But currently, that is not supported.

Get the density of an object in a CAD file. If the file is larger than 25MB, it will be performed asynchronously.

If the operation is performed asynchronously, the `id` of the operation will be returned. You can use the `id` returned from the request to get status information about the async operation from the `/async/operations/{id}` endpoint.

material_mass

material_mass_unit

Grams <https://en.wikipedia.org/wiki/Gram>

Kilograms <https://en.wikipedia.org/wiki/Kilogram>

Pounds <https://en.wikipedia.org/wiki/Pound_(mass)>

Get CAD file density.

We assume any file given to us has one consistent unit throughout. We also assume the file is at the proper scale.

This endpoint assumes if you are giving a material density in a specific mass unit per cubic measure unit, we return a mass in mass units. The same mass units as passed in the material density.

In the future, we will use the units inside the file if they are given and do any conversions if necessary for the calculation. But currently, that is not supported.

Get the mass of an object in a CAD file. If the file is larger than 25MB, it will be performed asynchronously.

If the operation is performed asynchronously, the `id` of the operation will be returned. You can use the `id` returned from the request to get status information about the async operation from the `/async/operations/{id}` endpoint.

material_density

material_density_unit

Get CAD file mass.

We assume any file given to us has one consistent unit throughout. We also assume the file is at the proper scale.

This endpoint returns the square measure units.

In the future, we will use the units inside the file if they are given and do any conversions if necessary for the calculation. But currently, that is not supported.

Get the surface area of an object in a CAD file. If the file is larger than 25MB, it will be performed asynchronously.

If the operation is performed asynchronously, the `id` of the operation will be returned. You can use the `id` returned from the request to get status information about the async operation from the `/async/operations/{id}` endpoint.

Square centimeters <https://en.wikipedia.org/wiki/Square_centimeter>

Square decimeters <https://en.wikipedia.org/wiki/Square_decimeter>

Square feet <https://en.wikipedia.org/wiki/Square_foot>

Square inches <https://en.wikipedia.org/wiki/Square_inch>

Square kilometers <https://en.wikipedia.org/wiki/Square_kilometer>

Square meters <https://en.wikipedia.org/wiki/Square_meter>

Square millimeters <https://en.wikipedia.org/wiki/Square_millimeter>

Square yards <https://en.wikipedia.org/wiki/Square_mile>

Get CAD file surface area.

We assume any file given to us has one consistent unit throughout. We also assume the file is at the proper scale.

This endpoint returns the cubic measure units.

In the future, we will use the units inside the file if they are given and do any conversions if necessary for the calculation. But currently, that is not supported.

Get the volume of an object in a CAD file. If the file is larger than 25MB, it will be performed asynchronously.

If the operation is performed asynchronously, the `id` of the operation will be returned. You can use the `id` returned from the request to get status information about the async operation from the `/async/operations/{id}` endpoint.

Cubic centimeters (cc or cm³) <https://en.wikipedia.org/wiki/Cubic_centimeter>

Cubic feet (ft³) <https://en.wikipedia.org/wiki/Cubic_foot>

Cubic inches (cu in or in³) <https://en.wikipedia.org/wiki/Cubic_inch>

Cubic meters (m³) <https://en.wikipedia.org/wiki/Cubic_meter>

Cubic yards (yd³) <https://en.wikipedia.org/wiki/Cubic_yard>

US Fluid Ounces (fl oz) <https://en.wikipedia.org/wiki/Fluid_ounce>

US Gallons (gal US) <https://en.wikipedia.org/wiki/Gallon>

Liters (l) <https://en.wikipedia.org/wiki/Litre>

Milliliters (ml) <https://en.wikipedia.org/wiki/Litre>

Get CAD file volume.

CAD file operations. Create, get, and list CAD file conversions. More endpoints will be added here in the future as we build out transforms, etc on CAD models.

file

File

Zookeeper

Zookeeper: The Conversational CAD Agent For Parametric Modeling

Automation

Automating Your Workflow

File Formats

A Practical Overview of CAD File Formats

KCL: A Programming Language for Parametric CAD

Geometry Engine

Zoo CAD Engine Overview

Overview

Getting Started

Parametric Modeling

Assemblies

3D Design

Modes

Queue and Steer

Zoodle

ML / AI

Simulation

GD&T Annotations (MBD)

Documentation

Import

Export

Version Control

Default Project Folder

Aquarium

Data Management

Technical Support

Zoo Design Studio Stream

System Requirements

Project Browser

Modeling Area

New Window

Feature Tree

Body Pane

Code Editor

File

Endpoints